Lenze 8400 - Manual (Page 1429)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
1429
18 Function library
18.2 System blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.2 System blocks
This chapter describes the system blocks which are available for the controller in the FB Editor.
Overview of system blocks available

The function blocks are described in the chapter " Function blocks ". ( 1154)
System block Function can be inserted into
level:
I/O Appl.
LS_AnalogInput Interface to the analog input terminals
 Analog terminals ( 326)

LS_CANManagement Control of internal functions of the CAN driver and display of the
"Operational" status as well as the node address
 CANopen option ( 629)

LS_DataAccess Lenze internal only 
LS_DeviceMonitor Motor control status signals
 Motor control (MCTRL) ( 127)

LS_DigitalInput Interface to the digital input terminals
 Digital terminals ( 303)

LS_DigitalOutput Interface to the digital output terminals
 Digital terminals ( 303)

LS_DisFree Display of 8 arbitrary 16-bit signals of the application on display
codes
 
LS_DisFree_a Display of 8 arbitrary analog signals of the application on display
codes
 
LS_DisFree_b Display of 16 arbitrary digital signals of the application on a bit
coded display code
 
LS_DisFree_p Display of 8 arbitrary position signals of the application on
display codes
 
LS_DriveInterface Interface to drive control (DCTRL)
 Device control (DCTRL) ( 95)

LS_IRInterface Interface to the optional infrared remote control 
LS_Keypad Control via keypad 
LS_MotionControlKernel Interface to the basic drive function implemented in the Motion
Control Kernel (MCK)
 Basic drive functions (MCK) ( 437)

LS_MotorInterface Interface to motor control (MCTRL)
 Motor control (MCTRL) ( 127)

LS_MultiEncoder Interface to the SSI encoder evaluation  
LS_ParFix
LS_ParFix_2
Output of frequently used constants (TRUE, FALSE, 100 %, etc.) to
be used in the interconnection
• LS_ParFix_2 is available from version 12.00.00.
 
LS_ParFree
LS_ParFree_2
Output of 32 parameterisable 16-bit signals
• LS_ParFree_2 is available from version 12.00.00.
 
LS_ParFree_a
LS_ParFree_a_2
Output of 16 parameterisable analog signals
• LS_ParFree_a_2 is available from version 12.00.00.
 
LS_ParFree_b Output of 32 parameterisable digital signals  
LS_ParFree_p Output of 8 parameterisable position signals  
LS_ParFree_v
LS_ParFree_v_2
Output of 8 parameterisable speed signals
• LS_ParFree_v_2 is available from version 12.00.00.
 