Lenze 8400 - Manual (Page 151)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
151
5 Motor control (MCTRL)
5.4 V/f characteristic control (VFCplus)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.4.2 Basic settings
The "Initial commissioning steps" listed in the table below are sufficient for a simple characteristic
control.
• Detailed information on the individual steps can be found in the following subchapters.

Tip!
Information on the optimisation of the control mode and the adaptation to the real
application is provided in chapter " Optimising the control mode ". ( 154)
Parameterisable additional functions are described correspondingly in the chapter
" Parameterisable additional functions ". ( 242)
Initial commissioning steps
1. Defining the V/f characteristic shape . ( 152)
2. Defining current limits (Imax controller) . ( 153)