Lenze 8400 - Manual (Page 1351)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
1351
18 Function library
18.1 Function blocks | L_OffsetGainPhiP_2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.1.126 L_OffsetGainPhiP_2
This FB can add an offset to an angle signal and amplify it afterwards.
• The internal calculations (addition and subtraction) are carried out with 32 bits without
overflow/underflow. Division is not remainder considered.
• Offset and gain are selected via parameters.
• The value provided at the dnOut_p output is internally limited to ±2 31 -1.
Inputs
Outputs
Parameter
Function
Identifier
Data type
Information/possible settings
dnIn_p
DINT
Input signal
Identifier
Data type
Value/meaning
dnOut_p
DINT
Output signal
• Internal limitation to ±2 31 -1 (±2147483647)
Parameter Possible settings Info
C00673/2 -2147483647 Incr. 2147483647 Offset
• Lenze setting: 0 incr.
C00674/2 -2147483647 2147483647 Gain factor
• Scaling:
65535 ≡ gain factor 1
• Lenze setting: 65536
/B2IIVHW*DLQ3KL3B
GQ,QBS GQ2XWBS
r
2IIVHW *DLQ
& &
dnOut_p dnIn_p Offset + ( ) Gain factor ⋅ =