Lenze 8400 - Manual (Page 21)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
21
1 About this documentation
1.1 Document history
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
Target group
This documentation is intended for all persons who want to parameterise, configure and diagnose
the 8400 protec HighLine controller with the engineering software L-force »Engineer« and the X400
keypad.
Validity
The information in this documentation are valid for the following standard devices:
Screenshots/application examples
All screenshots provided in this documentation are application examples. Depending on the
software version of the controller and the version of the installed »Engineer« software, the
screenshots in this documentation may differ from the representation in the »Engineer«.

Tip!
Information and tools for Lenze products are provided in the download area at
http://www.Lenze.com  Download
1.1 Document history

Danger!
The controller is a source of danger which may lead to death or severe injury of persons.
To protect yourself and others against these dangers, observe the safety instructions
before switching on the controller.
Please read the safety instructions provided in the 8400 protec mounting instructions
and in the 8400 protec hardware manual. Both documents are supplied with the
controller.
Product series Type designation from software version
8400 protec HighLine E84DHxxxx 01.00
Version Description
3.0 03/2013 TD05 Extended by new functions for 8400 protec HighLine V12.00.00 and converted to
new layout
2.1 02/2011 TD05 Error corrections & supplements
2.0 12/2010 TD05 Extended by new functions for 8400 protec HighLine V06.00.00
1.0 02/2010 TD05 First edition, parameter reference V02.00.00