C00710 | la_tabpos: analog connection list, C00710, 16 parameter reference – Lenze 8400 User Manual
Page 882
16
Parameter reference
16.2
Parameter list | C00706
882
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00706
C00710
Parameter | Name:
C00706 | LA_NCtrl_Out digital signal list
Data type: UNSIGNED_16
Index: 23869
d
= 5D3D
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00710 | LA_TabPos: Analog connection list
Data type: UNSIGNED_16
Index: 23865
d
= 5D39
h
Connection parameters for "Table positioning" application: 16-bit inputs
• Selection of the 16 bit output signals to be connected to the 16 bit input signals
• The selection list contains all 16 bit output signals which can be assigned to the 16 bit inputs displayed by the
subcodes.
Selection list
See
selection list - analog signals
Subcodes
Lenze setting
Info
C00710/1
0: Not connected
: wCanDriveControl
Input for control word from CAN to device control
C00710/2
0: Not connected
: wMciDriveControl
Input for control word from communication interface to
device control
C00710/3
0: Not connected
: nTorqueMotLim_a
Input for maximum torque in motor mode
C00710/4
0: Not connected
: nTorqueGenLim_a
Input for maximum torque in generator mode
C00710/5
0: Not connected
: nMainSetValue_a
Input for main speed setpoint
C00710/6
0: Not connected
: nAuxSetValue_a
Input for additional speed setpoint
C00710/7
0: Not connected
: wMckCtrl1
Input for MCK control word 1
C00710/8
0: Not connected
: wMckCtrl2
Input for MCK control word 2
C00710/9
0: Not connected
: wMckOperationMode
Input for selection of MCK operating mode
C00710/10
0: Not connected
: wPosProfileMode
Input for selection of MCK positioning mode in
positioning mode
C00710/11
0: Not connected
: wPosProfileNo
Input for MCK positioning profile number in positioning
mode
C00710/12
0: Not connected
: nGPAnalogSwitchIn1_a
Input for analog switch - analog signal 1
C00710/13
0: Not connected
: nGPAnalogSwitchIn2_a
Input for analog switch - analog signal 2
C00710/14
0: Not connected
: nGPArithmetikIn1_a
Input for arithmetic function - analog signal 1
C00710/15
0: Not connected
: nGPArithmetikIn2_a
Input for arithmetic function - analog signal 2
C00710/16
0: Not connected
: nGPMulDivIn_a
Input for analog signal for multiplication/division
C00710/17
0: Not connected
: nGPCompareIn1_a
Input for comparison operation - analog signal 1