Lenze 8400 - Manual (Page 615)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
615
10 Oscilloscope function
10.2 User interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.2 User interface
The oscilloscope user interface is available in the »Engineer« from version 2.16 onwards!

How to go to the oscilloscope user interface:
1. Select the controller in the Project view.
2. Select the Oscilloscope tab from the Workspace.
The oscilloscope user interface contains the following control and function elements:
 Oscilloscope toolbar  Trigger settings
 Oscillogram  Cursor function: Reading individual measured
values
 Vertical channel settings
 Selecting the variables to be recorded
 Horizontal settings
 Selecting the recording time/sample rate
 Status bar  Starting recording
 Oscillogram selection  Input field for comments