15 parameter reference – Lenze E94AxPExxxx User Manual
Page 756
15
Parameter reference
15.2
Parameter list | C00003
756
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19726336 Device command executed successfully
19726337 General error
19760132 File could not be opened.
19760157 Fault while reading out of a file.
19760158 Fault while writing into a file.
19760160 Unexpected end of file.
19760386 Device command in process
19767297 Access to file has been denied since the file is already
accessed from another position
19767301 I/O fault when accessing the file system
19767308 RAM is full
19767309 Access authorisation denied
19767324 No free memory on the memory module
19791872 Device command executed successfully
19791873 General error
19825668 File could not be opened.
19825693 Fault while reading out of a file.
19825694 Fault while writing into a file.
19825696 Unexpected end of file.
19825922 Device command in process
19832833 Access to file has been denied since the file is already
accessed from another position
19832837 I/O fault when accessing the file system
19832844 RAM is full
19832845 Access authorisation denied
19832860 No free memory on the memory module
19857408 Device command executed successfully
19857409 General error
19891204 File could not be opened.
19891229 Fault while reading out of a file.
19891230 Fault while writing into a file.
19891232 Unexpected end of file.
19891458 Device command in process
19898369 Access to file has been denied since the file is already
accessed from another position
19898373 I/O fault when accessing the file system
19898380 RAM is full
19898381 Access authorisation denied
19898396 No free memory on the memory module
Status
Meaning
Device command