15 parameter reference – Lenze E94AxPExxxx User Manual
Page 755
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
755
15
Parameter reference
15.2
Parameter list | C00003
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13303808 Device command executed successfully
13303809 General error
13337604 File could not be opened.
13337629 Fault while reading out of a file.
13337630 Fault while writing into a file.
13337631 Invalid file type.
13337632 Unexpected end of file.
13337634 Checksum error
13337858 Device command in process
13343232 CAN fault
... ...
13343487 CAN fault
13344769 Access to file has been denied since the file is already
accessed from another position
13344773 I/O fault when accessing the file system
13344780 RAM is full
13344781 Access authorisation denied
13344796 No free memory on the memory module
13369344 Device command executed successfully
13369345 General error
13403140 File could not be opened.
13403165 Fault while reading out of a file.
13403166 Fault while writing into a file.
13403167 Invalid file type.
13403168 Unexpected end of file.
13403170 Checksum error
13403394 Device command in process
13408768 CAN fault
... ...
13409023 CAN fault
13410305 Access to file has been denied since the file is already
accessed from another position
13410309 I/O fault when accessing the file system
13410316 RAM is full
13410317 Access authorisation denied
13410332 No free memory on the memory module
Status
Meaning
Device command