9 start application, Start application, 5drive interface – Lenze E94AxPExxxx User Manual
Page 103

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
103
5
Drive interface
5.2
Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.9
Start application
The
= "31: Start application" device command is used to start the active application in the
controller.
[5-17] "Start application" function
• The number of the currently active application is displayed in
.
• The current program status is displayed in
.
• The active function state of the application is displayed in
Tip!
This device command can also be activated via the
icon in the Toolbar.
Possible status displays for this device command
Related device commands
Memory module MM
9400
RAM
Firmware
Application 1
Application
Application 2
Application 3
Status (
Meaning
2065666 Device command in process
2031616 Device command executed successfully
2031617 General error