Lenze E94AxPExxxx - Manual (Page 163)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
163
6 Motor interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6 Motor interface
This chapter provides you with information on initial commissioning of the motor and the
parameterisation of the internal motor control of the controller.

Note!
The motor interface contains all control functions that are not provided by other basic
drive functions.
To select application-specific setpoints, the motor interface can be extended by
appropriate interfaces using the basic functions " Speed follower ", " Torque follower " and
" Position follower ".
The application-specific conditioning of the encoder signals is executed with the basic
function " Encoder evaluation ".