Lenze E94AxPExxxx - Manual (Page 37)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
37
4 PLC functionality
4.1 Setting the controller in »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. Repeat export function for further controllers (components) with PLC functionality
• Independent of the project structure in »Engineer«, all exported component directories
are saved in the same directory.
Please note that, as an exception to the Lenze setting, the directory structure of the project
can be stored differently for each axis.
The directory path of the PLC project is saved relatively to the directory of the »Engineer«
project in the »Engineer« project. The PLC project will only be saved with an absolute path
indication if the PLC project is located on a different drive than the »Engineer« project. This,
among other things, makes the transfer of the project more difficult.
The "FileSave under" menu command only serves to save the »Engineer« project in a
different directory. The PLC projects and the assignment to the PLC projects in the
»Engineer« project remain untouched.