Lenze E94AxPExxxx - Manual (Page 704)

14 Diagnostics & fault analysis
14.7 Error messages of the operating system
704
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
File ProjectSelection.dat invalid [0x008c0006]
File ProjectList.dat invalid [0x008c0007]
File DeviceCFG.dat invalid [0x008c0008]
Project is not loaded [0x008c0009]
Project is not available [0x008c000a]
Module ID (decimal) Error ID (decimal)
140: Application project manager 6
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Module ID (decimal) Error ID (decimal)
140: Application project manager 7
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Module ID (decimal) Error ID (decimal)
140: Application project manager 8
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Module ID (decimal) Error ID (decimal)
140: Application project manager 9
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Application could not be loaded because of a file error. Load new or different application.
Module ID (decimal) Error ID (decimal)
140: Application project manager 10
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Application not available. • Download application with Engineer
• Switch off controller and use a different memory
module with an existing application.