Lenze E94AxPExxxx - Manual (Page 276)

6 Motor interface
6.9 Monitoring
276
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.9.5 Maximum current monitoring
The ultimate motor current I
ULT
to be parameterised in C00620 is a limit value to protect the motor
from destruction or influence of the rated data.
• This limit value must not be travelled cyclically in the drive process.
• The maximum current parameterisable in
C00022 should have a sufficient distance from this
limit value.
• If the instantaneous value of the motor current exceeds the limit value set in C00620 the
response set in C00619 is executed for motor protection (Lenze setting: Fault).

Note!
When you select a Lenze motor from the catalogue and transfer the plant parameters of
the motor to the controller, the setting in C00620 is automatically adjusted to the
selected motor.