39 save cam data, Save cam, Data – Lenze E94AxPExxxx User Manual
Page 138: Save cam data, 5drive interface
5
Drive interface
5.2
Device commands
138
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.39
Save cam data
The
= "502: Save cam data" device command serves to save the cam data available in the
main memory of the controller with mains failure protection in the memory module.
[5-23] "Save cam data" function
• This function is executed in the background and is also possible when the controller is enabled
and the application is running.
• However, this function is only executed if valid cam data are available.
• The cam data can also be saved if previously no cam data have been available on the memory
module.
• While the function is executed, no online change and no change of the cam data via parameters
can be carried out.
• For saving the cam data, you do not need to enter a possibly existing user password (
).
Tip!
Detailed information on the access protection can be found in the chapter "Basic drive
functions", subchapter "
9400
RAM
Memory module MM
Cam data
Cam data
Cam application