Lenze E94AxPExxxx - Manual (Page 131)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
131
5 Drive interface
5.2 Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.35 Unbind/bind Ethernet module MXI2
The C00002 = "102: Unbind/bind Ethernet module: MXI2" device command is used to reinitialise
the Ethernet interface of an Ethernet communication module in module slot MXI2, e. g. to accept a
newly set IP or gateway address without mains switching.

Tip!
Detailed information on the Ethernet communication module (E94AYCEN) can be found in
the "Ethernet" Communication Manual.
Possible status displays for this device command
Related device commands
 Unbind/bind Ethernet module MXI1 ( 130)
Status ( C00003 ) Meaning
6718722 Device command in process
6684672 Device command executed successfully
6684673 General error