Lenze E94AxPExxxx - Manual (Page 65)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
65
4 PLC functionality
4.7 Completing the PLC project
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to generate a boot project:
1. Select OnlineCreate boot project
2. Click on the Yes button.
3. Display of the created files:
4. Click OK.
4.7.3 Saving the PLC project
In order to prevent changes to the PLC project from being lost, they have to be saved via the menu
command FileSave before exiting »PLC Designer«.
4.7.4 Import in the »Engineer« project
The PLC project must be imported in »Engineer« after being completed.
The import causes
• the project directory to be copied with all subdirectories to the »Engineer« project directory
• the boot project to be saved in the »Engineer« project
• each user code to be declared in the »Engineer« project.
• user error messages to be imported.