beautypg.com

H3C Technologies H3C Intelligent Management Center User Manual

Page 97

background image

75

{

Primary DNS—IP address of the primary DNS server assigned by PPTP.

{

Secondary DNS—IP address of the secondary DNS server assigned by PPTP.

{

Connection Time—Amount of time (hh:mm:ss) the controller or integrated services access
point has been connected to the PPTP server.

{

Tx packets—Number of packets transmitted.

{

Tx dropped—Number of transmitted packets that were dropped.

{

Tx errors—Number of packets with transmission errors.

{

Rx packets—Number of packets received.

{

Rx dropped—Number of received packets that were dropped.

{

Rx errors—Number of packets received with errors.

VPN Users list contents

{

Username—Name with which the VPN user logged in.

{

VLAN ID—Identifier of the VLAN.

{

Local IP address—IP address assigned to the VPN user on the local network.

{

Remote IP address—IP address assigned to the VPN user on the remote network.

{

Connection Time—Time that the VPN connection was established (HH:MM:SS).

{

Connection Type—Type of VPN connection.

{

Port—Port where the VPN connection was established.

Ports Status tab

Status—Icon in green indicates the port connection is active. An icon in red indicates the port
connection is not active.

Port—Name of the port (LAN, Internet, or bridge).

Tx Packets—Number of transmitted packets.

Tx Dropped—Number of transmitted packets dropped.

Tx Errors—Number of packets with transmission errors.

Rx Packets—Number of received packets.

Rx Dropped—Number of received packets dropped.

Rx Errors—Number of packets received with errors.

Collisions—Collisions indicate how many times two wireless clients tried to use the network
simultaneously. A small number of collisions is normal. A large number of collisions indicates

that not enough bandwidth exists to support the traffic on the network.

Ethernet Link Speed (Mbps)—Indicates the speed in Mb/s of the Ethernet connection for the port.

Ethernet Duplex—Indicates the duplex status of the Ethernet connection for the port.

VLANs Status tab

VLAN ID—Identifier of the VLAN.

Port—Name of port associated with the VLAN.

Bytes Received (KB)—Number of bytes received.

Bytes Sent (KB)—Number of bytes sent.

IP Address/Subnet Mask—IP address and subnet of the device associated with the VLAN.

IPsec Status tab