Viewing the physical topology, Location view topology – H3C Technologies H3C Intelligent Management Center User Manual
Page 413
391
Viewing the physical topology
The physical topology displays the network devices involved in connecting an AC to the specified fit
AP. This topology is available only when both the AC and fit AP are Comware-based devices.
To view the physical topology between an AC and the specified fit AP:
1.
Click the Service tab.
2.
Locate the target AC in one of the following ways:
Method 1
a.
From the navigation tree, select WLAN Manager > Wireless Topology.
b.
Right-click the blank area and select Find from the shortcut menu. The Query Devices
window appears.
c.
Enter the device label of the target AC AP in the Content box.
d.
Click Query. The target AC will be displayed on the Find Result window.
Method 2
a.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
b.
Click the Operation icon
of the target AC.
c.
Select
View Topology from the shortcut menu. The system automatically locates the AC
on the wireless device topology that appears.
3.
Double-click the icon of the AC, or right-click the AC icon and then select Open Topology from
the shortcut menu.
The AC device topology appears, displaying the AC and all its managed fit APs.
4.
Right-click the icon of a fit AP, and select View Physical Topology from the shortcut menu.
The Physical Topology (Snapshot) window appears, displaying the physical connections
between the AC and the fit AP.
Location view topology
The location view topology displays all the fit APs and fat APs contained in a location view and the
clients associated them. You can add APs deployed in close proximity to the same location view, and
then perform centralized and visualized management on them directly from the location view topology.
The location view topology also offers the wireless locating and wireless RF management functions.
For more information, see "
For information about location views, see "
."
Viewing the topology of a location view
1.
Click the Service tab.
2.
Enter the location view topology by using one of the following methods:
Method 1
a.
From the navigation tree, select WLAN Manager > Wireless Topology. The wireless device
topology window appears.
b.
On the left navigation tree, select Topology > Wireless Topology > Location View. The
location view topology displays all location views.