H3C Technologies H3C Intelligent Management Center - Manual (Page 501)

479
{
Detecting AC—Device label of the AC with which the sensor that detected the AP is
associated. Click the label to view the AC details.
{
Device vendor info—Vendor of the detected AP. If the sensor does not obtain vendor
information about the AP, this field displays null.
{
Last Detection Time—Time when the AP was last detected.
{
Static List Status—Whether or not the AP is on the Static Trusted Address List, Alarm-Ignored
Address List, Static Blocked Address List, and Countermeasures Address List of an AC.
A green icon
indicates that the AP is on the list. Click the icon to remove it from the list.
A gray icon indicates that the AP is not on the list. Click the icon to add the AP to the list.
An AP cannot be on the Static Trusted Address List and the Static Blocked Address List at the
same time.
{
Locate—Click the Locate icon to display the AP in the location view where the sensor that
detected the AP resides. If the sensor is not in the location view, the operation fails.
If the Detected AP List contains enough entries, the following navigational aids appear:
{
Click to page forward in the Detected AP List.
{
Click to page forward to the end of the Detected AP List.
{
Click to page backward in the Detected AP List.
{
Click to page backward to the front of the Detected AP List.
3. Click 8, 15, 50, 100, or 200 from the right side of the main pane to specify the number of items
you want to display on each page.
NOTE:
You can sort the Detected AP List by the BSSID, SSID, Category, and Detected AC fields. Click the
column label to sort the list by the selected field. The column label allows you to toggle between the
various sort options specific to each field.
Synchronizing detected APs
By default, IMC synchronizes the most recent detected AP list from managed ACs every 2 hours. You
can also manually perform the synchronization operation.
To manually synchronize detected APs:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > APs Detected from the navigation tree.
The Detected AP List displays all detected APs.
3. Click Synchronize.
The page is refreshed to display the most recent detected AP list after the synchronization
process is completed.
Querying detected APs
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.