H3C Technologies H3C Intelligent Management Center - Manual (Page 352)

330
Encryption mode Security information
WPA 802.1X
• Version—Select a WPA version from the list. Options are WPA,
WPA2, and WPA or WPA2.
• Cipher—Select an encryption mode from the list. Options are TKIP,
CCMP (AES), and TKIP + CCMP (AES).
• Address—Enter the IP address or domain name of the primary
RADIUS server.
• Port—Enter the authentication port of the RADIUS server.
• Secret—Enter the password used for communication between the AC
and the RADIUS server.
• Retry Interval (s)—Enter the retry interval after the communication
between the AC and RADIUS server times out.
• Retry Timeout (s)—Enable or disable setting the retry timeout for the
communication between the AC and RADIUS server, and enter the
retry timeout in the box if you enable the function. For example, if you
select Retry Timeout(s) and enter 10 in the box, the communication
between the AC and the RADIUS server times out if the RADIUS does
not respond within 10 seconds. If you disable this option, the AC
determines whether the communication times out according to the
default response timeout on the RADIUS server.
• Secondary RADIUS Server—Enable or disable the secondary RADIUS
server. If you enable the server, set the Address (Secondary RADIUS
Server) and Secret options for the server.
• Address (Secondary RADIUS Server)—Enter the IP address or domain
name of the secondary RADIUS server.
• Secret—Enter the password used for communication between the AC
and the secondary RADIUS server.
For Comware-based devices:
Basic information
{
SSID—Enter the SSID of the service policy, which must be unique. It cannot be null. The string
can include the following case-sensitive letters, digits, and special characters:
tilde (~), exclamation point (!), at sign (@), pound sign (#), dollar sign ($), percent sign (%),
caret (^), ampersand sign (&), asterisk (*), left brace({), right brace (}), left parenthesis ((),
right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<), right angle
bracket (>), hyphen (-), underscore (_), plus sign (+), equal sign (=), vertical bar (|), back
slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot
(.),forward slash (/), and spaces
{
Enable—Enable or disable the service policy after it is applied to the AC or fat AP.
{
Encryption Mode—This field cannot be modified.
{
Hide SSID—Select this option to hide the SSID in beacon frames sent by the AP. When this
parameter is selected, clients cannot obtain the SSID from the beacon frames and must
configure the SSID before accessing the wireless network. If this parameter is not selected,
clients can obtain the SSID from the beacon frames to access the wireless network.
{
Authorization Mode—Authorization mode of the service policy. Options are:
− Open System—No authentication is performed for any client that request for
authentication.
− Shared Key—The client must be configured with the same shared key as the device. This
option is available only when the cipher suite is WEP40 or WEP104.