Modifying a wlan – H3C Technologies H3C Intelligent Management Center User Manual
Page 89
67
Encryption Security information parameters
WPA 802.1X
•
Version—Select a WPA version. Options are WPA, WPA2, and WPA or WPA2. The
default cipher value varies with WPA versions. For more information, see
.
•
Cipher—Select a link layer encryption protocol. Options are TKIP, CCMP (AES), and
TKIP+CCMP (AES). The parameter is determined by Encryption and Version.
•
Address (Primary Authentication Server)—Enter the IP address or domain name of
the primary authentication server.
•
Port—Enter the port used by the authentication server to listen for authentication
packets.
•
Secret—Enter the password used for communication between the AC and the
authentication server.
•
Retry Interval (s)—Specify the time the AC must wait before retrying to connect to
the authentication server after a connection times out.
•
Retry Timeout (s)—Click the box next to the Retry Timeout (s) field to enable the
server response timeout timer and specify the server response timeout time. The
value is in the range of 2 to 60. If an AC sends an authentication request to the
authentication server, but receives no response in the specified time, it considers the
authentication request timed out. If you do not enable this feature, AC determines
whether an authentication request has timed out according to the default timeout
value configured on the RADIUS server.
•
Secondary RADIUS Server—Click the box next to the Secondary RADIUS Server field
to enable the secondary authentication server.
•
Address—Enter the IP address or domain name of the secondary authentication
server. This field appears only when Secondary RADIUS Server is enabled.
•
Secret—Enter the password used for communication between the AC and the
secondary authentication server. This field appears only when Secondary RADIUS
Server is enabled.
shows the key value range.
Table 5 Key value range
Key type
64 bits
128 bits
ASCII
A string of 5 alphanumeric characters
A string of 13 alphanumeric characters
HEX
A 10-digit hexadecimal number
A 26-digit hexadecimal number
shows the cipher default value.
Table 6 Cipher default value
Version Default
cipher value (cannot be modified)
WPA TKIP
WPA2 CCMP
(AES)
WPA or WPA2
TKIP + CCMP (AES)
Modifying a WLAN
1.
Click the Service tab.