H3C Technologies H3C Intelligent Management Center - Manual (Page 304)

282
13 Managing Cisco fit APs
WSM enables administrators to manage Cisco fit APs through Cisco ACs.
After a Cisco AC is synchronized to WSM, WSM obtains information about the fit APs managed by
the AC, and displays them in the Fit APs list.
Viewing the fit AP list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit APs list displays all Cisco fit APs. For information about the parameters, see " Viewing the fit AP
list ."
The Operation menu content for a Cisco fit AP is different from that for an HP/H3C fit AP. For more
information, see "
General management functions ."
Customizing columns
This function allows you to customize desired columns on the fit AP list.
Online status, device status, AP label and operation cannot be customized.
To customize columns:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit APs page displays all Cisco fit APs.
3. Click More, and select Custom Columns from the menu.
The dialog box that appears displays all columns that can be customized, including SN, IP
Address, MAC Address, Model, VLAN ID, AC, and Total Clients.
A selected column indicates it has been customized.
4. Customize the desired columns.
5. Click Default. All columns are selected.
6. Click OK. Only customized columns are displayed on the fit AP list.
Querying fit APs
WSM provides basic query and advanced query. Basic query criteria only include several key
parameters for quick search. Advanced query offers various query criteria for precise match.
For more information, see "
Querying fit APs ."