H3C Technologies H3C Intelligent Management Center - Manual (Page 496)

474
4. Click the Advanced icon next to the query field to expand the area.
5. In the Query Criteria area, specify one or more of the following query criteria:
{
MAC Address—Enter a partial or complete MAC address in the format of xx:xx:xx:xx:xx:xx.
WSM supports fuzzy matching for this field.
{
Address Type—Select an address type from the list. Options are All, Static, Dynamic, and
Static and Dynamic.
{
AC—Select the AC whose Static Blocked Address List you want to query.
6. Click Query.
The Blocked Address List displays all blocked addresses matching the query criteria. Click Reset
to clear the query criteria and display all blocked addresses.
Deleting an address from the static blocked address list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Blocked Address List tab.
The Blocked Address List displays all blocked addresses.
4. Click the Operation icon for the blocked address you want to delete.
5. Select Delete from Static Blocked Address List from the menu.
A confirmation dialog box appears.
6. Click OK.
Countermeasures address list
The Countermeasures Address List displays information about devices against which countermeasures
have been taken, their status, and it also displays the countermeasures information.
The Countermeasures Address List contains devices manually added to the list, and devices detected
by WIPS. For a device in the list, WIPS takes countermeasures against them as long as the sensor
detects them. For a device detected by WIPS, WIPS categorizes the device according the AP
categorization rule, static trust address list, static trusted OUI list, and static blocked address list. Then,
if the device type matches the predefined countermeasures policy, WIPS takes countermeasures
against the device.
Viewing the countermeasures address list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Countermeasures Address List tab.
The Countermeasures Address List displays all countermeasures addresses.
Countermeasures Address List
{
MAC Address—MAC address of the device where countermeasures are taken.
{
Virtual Security Domain—For a Static device, this column displays the virtual domain name
to which the device belongs. For a Dynamic device, this column displays the virtual domain
to which the sensor that has detected the device belongs.