H3C Technologies H3C Intelligent Management Center - Manual (Page 174)

152
− 802.11n(5 GHz)
{
Admin Status—Select an admin status for the radio. Options are: Unlimited, Up, and Down.
{
Location—Enter a location view name, or press Space and then select a location view from
the list. All radios of the APs in the location view are displayed on the list.
c. Click Query. The radios matching the query criteria are displayed on the list.
d. Select one or more radios.
e. Click OK to go back to the radio batch configuration page. The Radio List displays all
selected radios.
9. Click OK. WSM starts to modify the radio parameters. After modification, the Result List page
appears, displaying the result for each operation.
Result List
{
AP Label—Label of the AP.
{
Radio ID—ID of the radio.
{
Result—Operation result.
10. Click Back to go back to the radio batch configuration page.
General management functions
An AC supports the following general management functions:
• Viewing topology
• Ping
• Traceroute
• Opening the Web manager
• Telnet
• SSH
These functions are the same as those for an HP MSM series/HP Comware-based AC. For more
information, see " General management functions ."
Configuring Cisco ACs in batches
To reduce repetitive operations and improve efficiency, WSM allows you to configure multiple ACs in
batches, such as creating WLANs in batches.
This function is different from batch configuring radios from the AC List in that the latter only allows
you to batch configure radios on a single AC.
Batch configuring groups
This function allows you to create and delete groups in batches.
Batch creating groups
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.