Locating a fat ap on the mapbar map, General management functions, Viewing topology – H3C Technologies H3C Intelligent Management Center User Manual
Page 221
199
{
Rx WEP Undecryptable—Number of received MPDUs, with the WEP subfield in the Frame
Control field set to one, that were discarded because it should not have been encrypted or
due to the receiving wireless client not implementing the privacy option.
{
Rx FCS Errors—Number of MPDUs, considered to be destined for this wireless client
(Address matches), received with an FCS error. Note that this does not include data received
with an incorrect CRC in the PLCP header. These are not considered to be MPDUs.
•
Quality of Service List
QoS statistics are not available for MSM devices running software version 5.3.x.
{
Very High Priority Tx Packets—Total number of QoS very high priority packets sent.
{
QoS High Priority Tx Packets—Total number of QoS high priority packets sent.
{
QoS Medium Priority Tx Packets—Total number of QoS medium priority packets sent.
{
QoS Low Priority Tx Packets—Total number of QoS low priority packets sent.
5.
Click Close.
Locating a fat AP on the Mapbar map
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.
3.
Click the Operation icon
of the target fat AP.
4.
Select
Locate to Map from the menu.
The Mapbar Map page appears. The location view to which the selected fat AP belongs is
highlighted on the map.
Some preconfigurations are required before you can locate fat APs on a Mapbar map. For more
information, see "
General management functions
Viewing topology
This function allows you to locate a fat AP on the wireless topology from the Fat AP List page.
To locate a fat AP on the wireless topology:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.
3.
Click the Operation icon
of the target fat AP.
4.
Select
View Topology from the menu.
The wireless topology page appears.
The selected fat AP is highlighted on the topology. Operators can perform a series of
operations on the fat AP from the topology. For more information, see "
."