Adding a fit ap to the ap group, Moving an ap to another ap group – H3C Technologies H3C Intelligent Management Center User Manual
Page 186
164
o.
To display all APs, click Reset.
Adding a fit AP to the AP group
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the operation icon
for the target Aruba AC, and select Group Configuration from the
menu.
The Group Configuration page appears and all AP groups are displayed in the AP group list.
4.
Click the name of the target AP group.
The APs in Group page appears and all APs in the AP group are displayed in the fit AP list.
5.
Click Add to Group.
A window appears and all APs except the ones in this AP group are displayed in the Device List.
6.
Query the APs in the Select Device area.
a.
Set the query criteria:
−
AP Label—Enter the label of the AP. This field supports fuzzy match.
−
Serial Number—Enter the serial number of the AP. This field supports fuzzy match.
−
IP Address—Enter the IP address of the AP. This field supports fuzzy match.
−
Online Status—Select the online status for the AP. Options are Unlimited, Online, and
Offline. If you select Unlimited, both online and offline APs are queried.
−
Group Name—Select an AP group to which APs to be queried belong. If you select
Unlimited, APs in all AP groups are queried.
−
Location—Select a location view where APs to be queried are located. You can also
enter the complete or partial name of the location view and select the location view from
the list that appears. If you do not select any location view, APs in all location views are
queried.
b.
Click Query.
All APs matching the criteria are displayed in the Device List.
c.
To display all APs, click Reset.
7.
Select the target APs in the Device List.
8.
Click OK.
Moving an AP to another AP group
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the operation icon
for the target Aruba AC, and select Group Configuration from the
menu.
The Group Configuration page appears and all AP groups are displayed in the AP group list.
4.
Click the name of the target AP group.
The APs in Group page appears and all APs in the AP group are displayed in the fit AP list.
5.
Select the target AP in the fit AP list.
6.
Click Change Group.
The Change Group window appears.
7.
From the name list, select the AP group to which the AP is moved.