H3C Technologies H3C Intelligent Management Center - Manual (Page 388)

366
4. Continue the procedure in one of the following ways:
{
Select the sub-location views you want to delete, and click Remove.
{
Click the Operation icon for the sub-location view you want to delete, and from the menu,
click the Delete icon .
A confirmation dialog box appears.
5. Click OK.
Adding APs to a location view or sub-location view
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List displays all location views.
3. Continue the procedure in one of the following ways:
{
Click the name of the target location view.
The Sub-location/Device List page appears.
{
On the Sub-location/Device List page, click the name of the target sub-location view.
The Sub-location/Device List page appears.
4. Click Add.
The Select Devices page appears.
5. To query APs, enter or select one or more of the following query criteria:
{
Device Label—Enter the device label of the AP. WSM supports fuzzy matching for this field.
{
Device Type—Select the AP type. Options are Fat AP and Fit AP.
{
Serial Number—Enter the serial number of the fit AP. WSM supports fuzzy matching for this
field.
{
IP Address—Enter a partial or complete IPv4 address of the fit AP. WSM supports fuzzy
matching for this field.
{
Model—Select the AP model. Options are Unlimited and all AP models available for the
WSM.
{
Online Status—Select the online status for the fit AP. Options are:
− Unlimited
− Online
− Offline
{
AC—Select the AC that manages the fit AP. Options are Unlimited and all ACs in WSM.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
Click Query. The Device List displays all APs matching the query criteria. Click Reset to clear the
query criteria and display all APs on the current location view or sub-location view.
6. Select the APs you want to add.
7. Click OK to add the selected APs to the location view or sub-location view.
All selected APs are displayed in the Sub-location/Device List.
NOTE:
You can add an AP to only one location view.