H3C Technologies H3C Intelligent Management Center - Manual (Page 504)

482
Querying the detected AP history
You can query the detected AP history records by using the query criteria for querying detected APs.
For more information, see " Querying detected APs ."
Detected client list
The Detected Client List displays the clients detected by all the sensors.
The clients are classified into the following categories:
• Authorized—Clients permitted in the WLAN, including:
{
Clients in the permitted device list that have associated with authorized APs.
{
Clients that have been associated with authorized APs by passing authentication and
encryption.
• Rogue—Clients prohibited in the WLAN, including:
{
Clients on the blocked address list.
{
Clients associated with rogue APs.
• Misassociated—Clients on the trusted address list but are associated with rogue APs.
• Uncategorized—Clients whose category cannot be determined.
WIPS categorizes a detected client by using the process as shown in Figure 57 .
Figure 57 Client classification process
Viewing the detected client list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Clients Detected from the navigation tree.