H3C Technologies H3C Intelligent Management Center - Manual (Page 265)

243
Online (primary) and Online (Secondary) states. If you select Online (Primary), all online fit
APs are displayed. If you select Online (Secondary), no fit APs can be displayed.
{
Vendor—Select the vendor of the fit AP. Options are Unlimited, H3C, HP, and Cisco.
{
AC—Select the AC that manages the fit AP. Options are all ACs managed by WSM.
{
Location—Enter or select the name of the location view to which the fit AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
c. Click Query.
The AP List displays all fit APs matching the query criteria.
d. Click Reset to clear the query criteria and display all fit APs.
Viewing detailed information about a fit AP
WSM obtains information about fit APs through the ACs, and allows operators to access a fit AP
details only from the Fit APs page.
To view a fit AP details:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click the device label of the fit AP whose detailed information you want to view.
Basic Information
{
AP Label—Device label of the fit AP.
Click the Modify icon . A dialog box appears. Modify the device label of the fit AP, as
needed.
{
Online Status—Online status of the fit AP. Options are Online and Offline.
{
AP Name—Name of the fit AP.
{
Serial Number—Serial number of the fit AP.
{
IP Address—IPv4 address of the fit AP.
{
AC—AC that manages the fit AP. Click the name link to view its details.
{
Model—Model of the fit AP.
{
MAC Address—MAC address of the fit AP.
{
Firmware Revision—Firmware version of the fit AP.
{
Software Revision—Software version of the fit AP.
{
Work Status—Operation status of the fit AP. Options are:
− Disconnected
− Authorized
− Join
− Firmware
− Security
− Configuration