H3C Technologies H3C Intelligent Management Center - Manual (Page 349)

327
− Start/End Time—Start or end time for statistics collection, in the YYYY-MM-DD hh:mm:ss
format.
− Transmitted Traffic (B)—Total traffic sent by the WLAN within the specified time range.
− Received Traffic (B)—Total traffic received by the WLAN within the specified time range.
− Total Traffic (B)—Total traffic sent and received by the WLAN within the specified time
range. The value is calculated based on statistics and might be slightly different from the
actual value.
{
Online Clients Statistics
The unit of time changes with the value of the time ranges.
If you select Online Clients, the following information is displayed:
− Online Clients Trend Graph—Trend of the clients accessing the WLAN within the data
collection time range. The x axis represents the time and the y axis represents the number
of clients.
− Peak Number of Online Clients—Maximum number of online clients that access the
WLAN in the statistics collection time range.
− Average Online Clients—Average number of online clients that access the WLAN in the
statistics collection time range.
Click Online Clients at the top of the trend graph to display the Details window.
− Time—Time when statistics are collected, in the YYYY-MM-DD hh:mm:ss format.
− Clients—Number of online clients that access the WLAN in the statistics collection time
range.
{
Client Online Duration Statistics
− Total Online Duration—Total online duration of the clients that access the WLAN within
the specified time range.
− Average Online Duration—Average online duration of the clients that access the WLAN
within the specified time range.
The Details area displays the following information about each client that accesses the
WLAN in the specified time range:
− Online Time—Time when the client gets online to access the WLAN, in the YYYY-MM-DD
hh:mm:ss format.
− Offline Time—Time when the client goes offline, in the YYYY-MM-DD hh:mm:ss format.
− MAC—MAC address of the client.
− Online Duration—Online duration of the client that accesses the WLAN, in the hh:mm:ss
format.
7. Click Close to close the dialog box.
Modifying WLANs in batches
You can modify WLANs in the WLAN List page.
• Modify the WLANs with the specified SSID on multiple devices in batches. Make sure the
devices are of the same vendor.
• Only modify a single WLAN if the devices to which the WLANs with the same SSID are bound
are from different vendors.