H3C Technologies H3C Intelligent Management Center - Manual (Page 525)

503
Displaying signal strengths on the map
You can display signal strengths on the map in the following way:
Right-click on a blank area, and from the shortcut menu, select one of the following:
• Show Signal Cover Area > By Signal > 2.4GHz
• Show Signal Cover Area > By Signal > 5GHz
The map displays the signal coverage area for each AP. Click to view signal strengths, as shown
in Figure 58 .
Figure 58 Displaying signal strengths (2.4 GHz)
Displaying transmission rates on the map
You can display transmission rates on the map in the following way:
Right-click on a blank area, and from the shortcut menu, select one of the following:
• Show Signal Cover Area > By Rate > 2.4GHz
• Show Signal Cover Area > By Rate > 5GHz
The map displays the signal coverage area of each AP. Click to view transmission rates, as shown
in Figure 59 .