H3C Technologies H3C Intelligent Management Center - Manual (Page 451)

429
Configuring the static countermeasures address list
The static countermeasures address list contains the MAC addresses of all manually configured rogue
devices. WIPS takes countermeasures against rogue devices in the list by using the following methods:
• Controlling authorized APs to prevent rogue clients.
• Enabling sensors to send 802.11 frames to disassociate rogue wireless devices.
Viewing the static countermeasures address list
1. Access the WIPS Management page.
2. Click the Static Countermeasures Address List tab.
The static countermeasures address list displays MAC addresses of all devices where
countermeasures are taken.
{
MAC Address—MAC address of the device.
{
Vendor—Vendor of the device or NIC. IMC uses the MAC address to identify the vendor of
the device or NIC. If the MAC address is not an OUI MAC address or a legal MAC address,
the field displays Unknown.
{
Delete—Allows you to delete the MAC address.
If the static countermeasures address list contains enough entries, the following navigational
aids are displayed:
{
Click the Next Page icon to page forward in the static countermeasures address list.
{
Click the Last Page icon to page forward to the end of the static countermeasures
address list.
{
Click the Previous Page icon to page backward in the static countermeasures address list.
{
Click the First Page icon to page backward to the front of the static countermeasures
address list.
Click 8, 15, 50, 100, or 200 at the upper right of the static countermeasures address list to
specify the number of items you want to display on each page.
NOTE:
You can sort the static countermeasures address list by the MAC Address and Vendor fields. Click the
column label to sort the list by the selected field. The column label allows you to toggle between the sort
options specific to each field.
Synchronizing the static countermeasures address list
IMC supports synchronizing the static countermeasures address list automatically or manually. By
default, IMC automatically synchronizes the static countermeasures address list every 2 hours
To manually synchronize the static countermeasures address list:
1. Access the WIPS Management page.
2. Click the Static Countermeasures Address List tab.
3. Click Synchronize to start synchronizing the static countermeasures address list.
The page is refreshed to display the most recent data after the synchronization process is
completed.