H3C Technologies H3C Intelligent Management Center - Manual (Page 401)

379
4. Click Add.
5. The Select Devices dialog box appears.
6. Enter or select one or more of the following query criteria to search for the APs you want to add:
{
AC—Select an AC for the fit AP. Options are all available ACs in WSM.
{
Device Label—Enter the label of the fit AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fit AP. WSM supports fuzzy
matching for this field.
An empty field does not serve as a query criterion.
7. Click Query.
8. The Device List displays all fit APs matching the query criteria.
Click Reset to clear the query criteria and display all fit APs.
9. Select the fit APs you want to add to the wireless custom view.
10. Click OK.
All selected fit APs are displayed in the Device List of the wireless custom view.
NOTE:
•
When you add a fit AP to a wireless custom view for the first time, the corresponding AC is added to
the view automatically. You can only add other fit APs of the AC next time.
• A fit AP can be added to multiple wireless custom views.
Removing fit APs from a wireless custom view
Removing a device from a wireless custom view removes the device from the current view only, not
from any other view or the WSM. Deleting a device deletes the device permanently from the WSM.
WSM automatically removes the AC from the device list of a wireless custom view if all fit APs on the
view are removed.
To remove fit APs from a wireless custom view:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Custom Views.
The Wireless Custom View List page displays all wireless custom views.
3. Click the name of the target wireless custom view.
The Device List page appears.
4. Select the fit APs you want to remove, and Click Remove.
A confirmation dialog box appears.
5. Click OK.
Testing network connectivity of an AC or online fit AP on a
wireless custom view
This function allows you to test the reachability of a managed AC or online fit AP from the IMC server,
and to troubleshoot and locate connectivity problems.