H3C Technologies H3C Intelligent Management Center - Manual (Page 498)

476
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Countermeasures Address List tab.
The Countermeasures Address List displays all countermeasures addresses.
4. Click Synchronize.
The page is refreshed to display the most recent countermeasures address list after the
synchronization process is completed.
Querying countermeasures addresses
To perform a basic query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Countermeasures Address List tab.
The Countermeasures Address List displays all countermeasures addresses.
4. Enter a countermeasures address next to the query field. WSM supports fuzzy matching for this
field.
5. Click the Query icon . The Countermeasures Address List displays all countermeasures
addresses matching the query criteria.
6. Clear the Query field, and click the Query icon to display all countermeasures addresses.
To perform an advanced query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Countermeasures Address List tab.
The Countermeasures Address List displays all countermeasures addresses.
4. Click the Advanced icon next to the query field to expand the area.
5. In the Query Criteria area, specify one or more of the following query criteria:
{
MAC Address—Enter a partial or complete MAC address in the format of xx:xx:xx:xx:xx:xx.
WSM supports fuzzy matching for this field.
{
AC—Select the AC whose Static Countermeasures Address List you want to query.
6. Click Query.
The Countermeasures Address List displays all countermeasures addresses matching the query
criteria. Click Reset to clear the query criteria and display all countermeasures addresses.
Detected APs
WIPS monitors APs in the wireless network, and categorizes each detected AP according to the AP
categorization rules, or assigns the AP a threat level.
WIPS classifies detected AP into the following types:
• Authorized—APs that are permitted in the WLAN, including:
{
APs that have associated with the AC.