H3C Technologies H3C Intelligent Management Center - Manual (Page 420)

398
Accessing the WIDS Config page
The WIDS Config page lists all the managed ACs in WSM. From this page, you can perform the
following operations:
• Enable or disable IDS for MSM series ACs and MSM series ACs.
• Configure WIDS detection rules for a Comware-based AC.
• Configure authorized APs for an MSM series AC.
• Enabling or disabling fit APs managed by an AC to detect rogue APs
To access the WIDS Config page:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > WIDS Config.
The ACs list displays all ACs in WSM.
AC List content
• Status—State of the IDS feature on the AC, Disable or Enable.
This field always displays Enable for a Comware-based AC.
• Device Label—Device label of the AC. Click the label to view the AC details.
• Model—AC model.
• IP Address—IP address of the AC.
• Detector—Number of fit APs managed by the AC that are enabled with Network Detector.
Click the number to enter the Detect Fit AP List page, which:
{
For a Comware-based AC, displays managed fit APs with a work mode of Hybrid or Monitor,
and allows you to configure the work mode for the fit APs in batches.
{
For an MSM series AC, displays managed fit APs with a work mode of Monitor, and allows
you to configure monitoring status for the fit APs in batches.
• Operation—Click the Operation icon to display the operation menu, which:
{
For a Comware-based AC, provides an WIDS Detection Rule option that allows you to
configure WIDS diction rules for the AC.
{
For an MSM series AC, provides the Enable/Disable IDS and Import/Export Authorized AP
List options.
If the AC List contains enough entries, the following navigational aids are displayed:
• Click the Next Page icon to page forward in the AC List.
• Click the Last Page icon to page forward to the end of the AC List.
• Click the Previous Page icon to page backward in the AC List.
• Click the First Page icon to page backward to the front of the AC List.
Click 8, 15, 50, 100, or 200 at the upper right of the AC List to configure how many items per page
you want to display.