H3C Technologies H3C Intelligent Management Center - Manual (Page 646)

624
AP availability summary report parameters:
• Report Period—Time range during which the statistics were collected.
• Location—Name of the location view for which the statistics are collected or All AP Devices.
AP availability summary report fields:
• Availability Highest Top 10—Displays the top 10 location views with the highest availability in a
bar chart.
• Availability Lowest Top 10—Displays the top 10 location views with the lowest availability in a
bar chart.
• Location—Location view name or All AP Devices.
• AP Number—Total number of APs.
• Total Unavailable Time—Total unavailable time of the APs.
• Total Available Time—Total available time of the APs.
• Availability—Percentage of time the APs are available.
AP availability detail report
This report displays detailed availability statistics for individual APs.
To view an AP availability detail report, configure the following parameters:
• Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
• Location—Select a specific location view for statistics collection, or select All AP Devices.
• Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
Figure 88 shows an example AP availability detail report.