H3C Technologies H3C Intelligent Management Center - Manual (Page 357)

335
Querying fit AP access ports
This function allows you to filter fit AP access ports with specific criteria.
To query fit AP access ports:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit AP Access Ports.
The AP Access Ports page appears.
3. Click the Fit AP tab.
The Device List page displays all fit AP access ports and the related fit AP information.
4. Enter or select one or more of the following query criteria:
{
AP Label—Enter the label of the fit AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fit AP. WSM supports fuzzy
matching for this field.
{
Online Status—Select a fit AP state from the list. Options are:
− Unlimited
− Online
− Online/Primary
− Online/Secondary
− Offline
The Online option is the same as both Online/Primary and Online/Secondary.
{
MAC Address—Enter a partial or complete MAC address of the fit AP. WSM supports fuzzy
matching for this field.
{
Serial Number—Enter a partial or complete serial number of the fit AP. WSM supports fuzzy
matching for this field.
{
Vendor—Select the vendor of the fit AP. Options are:
− Unlimited
− H3C
− HP
− Cisco
− Aruba
{
AC—Select the AC to which the fit AP connects. Options are Unlimited and all ACs
managed by WSM.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
5. Click Query.
The Device List displays all fit AP access ports matching the query criteria.
6. Click Reset to clear the query criteria and display all fit AP access ports.
Exporting fit AP access ports
This function allows you to export all fit AP access ports in the device list to a .csv file and save the file
locally.