H3C Technologies H3C Intelligent Management Center - Manual (Page 384)

362
{
Model—Model of the AP. This field is empty for a sub-location.
{
IP Address—IP address of the AP. This field is empty for a sub-location.
{
IPv6 Address—IPv6 address of the AP. This field is empty for a sub-location.
{
MAC Address—MAC address of the AP. This field is empty for a sub-location.
{
Online Clients—Number of online clients that have associated with the AP on the location
view. Click the number to view all the online clients. This field is empty for a sub-location.
{
Operation—Click the Operation icon for the sub-location or AP to display the operation
menu.
For a sub-location, the operational tasks provided in the Operation menu are:
− Modify
− Delete
− View Topology
For an AP, the operational tasks provided in the Operation menu are:
− View Topology
− Ping
− TraceRoute
− Locate to Map.
If the Sub-location/Device List contains enough entries, the following navigational aids are displayed:
• Click the Next Page icon to page forward in the Sub-location/Device List.
• Click the Last Page icon to page forward to the end of the Sub-location/Device List.
• Click the Previous Page icon to page backward in the Sub-location/Device List.
• Click the First Page icon to page backward to the front of the Sub-location/Device List.
Click 8, 15, 50, 100, or 200 at the upper right of the Sub-location/Device List to specify the number
of items you want to display on each page.
NOTE:
You can sort the Sub-location/Device List by every field except the Operation field. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the sort options
specific to each field.
Adding a location view
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List displays all location views.
3. Click Add.
The Add Location page appears.
4. Set the following parameters as needed:
{
Location Name—Enter a name to uniquely identify the location view.
{
Location Type—Select a type for the location view. Options are: