Deleting a wlan – H3C Technologies H3C Intelligent Management Center User Manual
Page 189
167
You cannot modify the profile name or SSID of the WLAN. For more information about other
parameters, see "
."
Binding a WLAN to an AP group or unbinding a WLAN from
an AP group
A WLAN can be used by the APs in an AP group only after it is bound to the group. A WLAN can
be bound to multiple AP groups.
By default, a WLAN is not bound to any group.
To bind a WLAN to an AP group or unbind a WLAN from an AP group:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the operation icon
for the target Aruba AC, and select WLAN Configuration from the
menu.
The WLAN Info page appears and all WLANs are displayed in the WLAN list.
4.
Click the operation icon
for the target WLAN, and select Group Bindings from the menu.
The group binding page appears and all AP groups are displayed in the Group List. The
Binding Status field displays the binding status of the AP groups.
5.
To bind the WLAN to an AP group, select the box under the Binding Status field. To unbind the
WLAN from an AP group, clear the box under the Binding Status field.
6.
Click OK.
The Result List page appears and the binding or unbinding result of each AP group is displayed
in the Result List.
Result List
{
Group Name—Name of the AP group.
{
SSID—SSID of the WLAN.
{
AC—Device label of the AC to which the AP group belongs.
{
Result—Binding or unbinding result.
7.
Click Back.
Deleting a WLAN
Before deleting a WLAN that has been bound to an AP group, unbind the WLAN from the AP group.
To delete a WLAN:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the operation icon
for the target Aruba AC, and select WLAN Configuration from the
menu.
The WLAN Info page appears and all WLANs are displayed in the WLAN list.
4.
Click the operation icon
for the target WLAN, and select Delete from the menu.
5.
Click OK from the dialog box that appears.