H3C Technologies H3C Intelligent Management Center User Manual
Page 231
209
{
Location—Enter or specify the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
9.
Click Query.
The Fat AP List displays all fat APs matching the query criteria. Click Reset to clear the query
criteria and display all fat APs.
10.
Specify the target fat APs.
11.
Click OK to close the Select Device window.
The Fat AP List displays all selected fat APs.
12.
Click OK.
The Result List page appears, displaying the operation result for deleting WLAN BSS interfaces
for each fat AP.
13.
Click Back to go back to the page for deleting WLAN BSS interfaces in batches.
Modifying the VLAN to which WLAN BSS interfaces belong
in batches
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Configuration Management.
3.
In the Fat AP Batch Configuration Management (H3C) area, click the BSS Interface Batch
Configuration link.
The BSS Interface Batch Configuration page appears.
4.
Click the Modify VLANs in Batches link.
5.
In the Modify VLAN area, set the following parameters, as needed:
{
Interface ID—Enter an interface ID or interface ID range. Separate the ID range with a
hyphen (-) (for example, 5-12).
{
VLAN—Enter a VLAN ID. The ID must be an existing ID on the selected fat APs. Otherwise,
the VLAN modification operation fails.
6.
In the Fat AP List area, click Add.
The Select Device dialog box appears.
7.
Enter or specify one or more of the following query criteria to search for the fat APs you want to
configure:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fat AP. WSM supports fuzzy
matching for this field.
{
Model—Enter the model of the fat AP. WSM supports fuzzy matching for this field.
{
Connectivity Status—Specify a connectivity state for the fat AP. Options are Unlimited,
Reachable, and Unreachable.
{
Location—Enter or specify the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
8.
Click Query.