H3C Technologies H3C Intelligent Management Center - Manual (Page 450)

428
Importing static blocked MAC addresses
WIPS supports importing MAC addresses to the static blocked address list in batches. Only .csv files
are supported. The files can contain only MAC addresses, and do not require any row heading or
line heading.
To import static blocked MAC addresses:
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
3. Click Import.
The Select File page appears.
4. Click Browse to select a file, or enter the URL or the file to be imported.
5. Click Next.
The Import MAC Address Information page appears, displaying the following information:
{
MAC Address—MAC address of the device.
{
Vendor—Vendor of the device or NIC. IMC uses the MAC address to identify the vendor of
the device or NIC. If the MAC address is not an OUI MAC address or a legal MAC address,
the field displays Unknown.
If you do not want to import certain MAC addresses, select them and click Delete.
6. Click OK.
The Imported MAC Address Result page appears, displaying the result for importing MAC
address information.
7. Click OK.
Deleting static blocked MAC addresses
This function allows you to delete one or more devices from the static blocked address list.
To delete static blocked MAC addresses:
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
3. Delete a single MAC address or multiple MAC addresses in batches:
{
Select the MAC addresses you want to delete, and click Delete.
{
Click the Delete icon for the MAC address you want to delete.
A confirmation dialog box appears.
4. Click OK.
Permitting blocked clients to access the WLAN
By default, WIPS prohibits the clients in the static blocked address list from accessing the WLAN. You
can configure WIPS to permit blocked clients to access the WLAN.
To permit blocked clients to access the WLAN:
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
3. Select Permit Blocked Device.
4. Click OK.