H3C Technologies H3C Intelligent Management Center - Manual (Page 733)

711
Deleting an endpoint type
Before deleting an endpoint type that has been used in describing endpoint client information, you
must delete the client information first. For more information about deleting client information, see
"
Deleting client information ."
To delete an endpoint type:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Endpoint Identification Management link.
The Endpoint Identification Management page appears.
5. Click Endpoint Type.
The Endpoint Type List displays all endpoint types that have been added to WSM.
6. Click the Delete icon for the endpoint type you want to delete.
A confirmation dialog box appears.
7. Click OK.
Managing OSs
From the OS List page, you can query, add, modify, and delete an OS.
Accessing the OS List page
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Endpoint Identification Management link.
The Endpoint Identification Management page appears.
5. Click OS.
The OS List displays all OSs that have been added to WSM.
OS List content
• OS—Operating system.
• Description—Description for the operating system.
• Modify—Click the Modify icon to enter the Modify OS page.
• Delete—Click the Delete icon to delete the operating system.
If the OS List contains enough entries, the following navigational aids are displayed.
Navigating the OS List
• Click the Next Page icon to page forward in the OS List.
• Click the Last Page icon to page forward to the end of the OS List.
• Click the Previous Page icon to page backward in the OS List.