Viewing online clients, General management functions – H3C Technologies H3C Intelligent Management Center User Manual
Page 308
286
6.
Modify the antenna configuration:
Enable the ports specified by the antenna.
{
A—Right port of the antenna.
{
B—Left port of the antenna.
{
C—Central port of the antenna.
7.
Modify channel assignment:
{
Channels in Use—Working channel of the radio.
{
Assignment Method—Select a channel assignment method. Options are Global and Custom.
−
Global—The AC assigns a channel globally. You need to log in to the AC to configure
this option. For more information, see the configuration guide of the AC.
−
Custom—Manually specify a working channel. The working channel of the radio does
not change unless you manually specify a new channel. Available channels are
determined by the country code of the AP.
8.
Modify Tx level power assignment:
{
Current Transmission Power(dBm)—The current transmission power of the radio.
{
Assignment Method—Select a transmission power level assignment mode. Options are
Global and Custom.
−
Global—The AC assigns the Tx power level globally. For information about configuring
the parameters that determine the current Tx power level assignment, see "
" and the configuration guide of the AC.
−
Custom—Manually specify a transmission power level in the range of 1 to 5. The current
Tx power level of the radio will not change unless you change it manually. For the
available transmission power levels, see
.
9.
Click OK.
Viewing online clients
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit APs page displays all Cisco fit APs.
3.
Click the number link in the Total Clients column for the target fit AP.
The Client List page displays information about all the online clients.
4.
Click the MAC address link for the target client to view its details.
General management functions
•
Ping
•
Traceroute
•
Locate to map
For more information about these functions, see "