H3C Technologies H3C Intelligent Management Center - Manual (Page 449)

427
{
Vendor—Vendor of the device or NIC. IMC uses the MAC address to identify the vendor of
the device or NIC. If the MAC address is not an OUI MAC address or a legal MAC address,
the field displays Unknown.
{
Delete—Allows you to delete the MAC address.
If the static blocked address list contains enough entries, the following navigational aids are
displayed:
{
Click the Next Page icon to page forward in the static blocked address list.
{
Click the Last Page icon to page forward to the end of the static blocked address list.
{
Click the Previous Page icon to page backward in the static blocked address list.
{
Click the First Page icon to page backward to the front of the static blocked address list.
Click 8, 15, 50, 100, or 200 at the upper right of the static blocked address list to specify the
number of items you want to display on each page.
NOTE:
You can sort the static blocked address list by the MAC Address and Vendor fields. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the sort options
specific to each field.
Synchronizing the static blocked address list
IMC supports synchronizing the static blocked address list automatically or manually. By default, IMC
automatically synchronizes the static blocked address list every 2 hours.
To manually synchronize the static blocked address list:
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
3. Click Synchronize to start synchronizing the static blocked address list.
The page is refreshed to display the most recent data after the synchronization process is
completed.
Querying static blocked addresses
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
3. Enter a partial or complete MAC address in the format of xx:xx:xx:xx:xx:xx.
4. Click Query.
The static blocked address list displays all matching static blocked MAC addresses.
5. Click Reset to clear the query criteria and display all static blocked MAC addresses.
Adding a static blocked MAC address
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
3. Click Add.
The Add MAC Address window appears.
4. Enter the MAC address you want to add, in the format of xx:xx:xx:xx:xx:xx.