Ap speed report – H3C Technologies H3C Intelligent Management Center User Manual
Page 650
628
•
IP Address—IPv4 address of the AP.
•
Core Frames Reception—Total number of frames received by the AP from the wired network.
•
Core Errors Reception—Total number of error packets received by the AP from the wired network.
•
Core Bytes Reception—Total number of bytes received by the AP from the wired network.
•
Core Bytes Transmission—Total number of bytes sent by the AP to the wired network.
•
Radio Frames Reception—Total number of frames received by the AP from the wireless network.
•
Radio Errors Reception—Total number of error packets received by the AP from the wireless
network.
•
Radio Bytes Reception—Total number of bytes received by the AP from the wireless network.
•
Radio Bytes Transmission—Total number of bytes sent by the AP to the wireless network.
AP speed report
This report displays the data reception and transmission speeds of individual APs, and depicts in a
line graph the overall trends of data reception and transmission speeds using aggregated data of all
APs over a given time period.
To view an AP speed report, configure the following parameters:
•
Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
•
Location—Select a specific location view for statistics collection, or select All AP Devices.
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
shows an example AP speed report.