H3C Technologies H3C Intelligent Management Center - Manual (Page 665)

643
• AP Name—Name of the access point contained in the hotspot location view.
• Status—State of the AP, Online or Offline.
• Serial ID—Serial ID of the AP.
• Model—Model of the AP.
• IP Address—IPv4 address of the AP.
Wireless asset statistics report
This report displays the asset statistics for the managed wireless devices in WSM in a pie chart.
No specific parameters are required for viewing a wireless asset statistics report.
Figure 104 shows an example wireless asset statistics report.
Figure 104 Wireless asset statistics report
The pie chart shows the number of assets by device category and the contribution of each device
category to the total. To view the device list of a specific asset category, click the slice corresponding
to it on the chart.
Client summary report
This report displays the total associated times and duration of clients by MAC address, and the top 10
clients with the longest total associated duration.
To view a client summary report, configure the following parameters:
• Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
• Location—Select a specific location view for statistics collection, or select All AP Devices.
• Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
• Online more than(0-999999 minutes)—Enter the online duration of the clients to be collected.
The report collects statistics about clients whose online duration is longer than the specified time.
Figure 105 shows an example client summary report.