H3C Technologies H3C Intelligent Management Center User Manual
Page 180
158
−
Custom—Manually specify a transmission power level. The transmission power level of
the radio does not change unless you manually specify a new power level. For the
available transmission power levels, see
.
9.
In the Selected Radio area, select the radios you want to modify. Options are All Radios and
Selected Radios.
{
All Radios—Select this option to modify parameters of all radios on Cisco ACs.
If you select Custom for Channel Assignment Method, and select a channel in the range of
36 to 165, you can only modify parameters for 802.11a/n radios; if you select a channel
in the range of 1 to 11, you can only modify parameters for 802.11b/g/n radios.
{
Selected Radios—Select this option to modify parameters of the selected radios on the
selected ACs.
a.
Click Add. A dialog box for selecting radios appears.
The Radio List displays all radios on Cisco ACs.
b.
Enter or select one or more of the following query criteria to search for the radios you want
to configure:
−
AP Label—Enter the AP label, which is case insensitive. WSM supports fuzzy matching
for this field.
−
AP Name—Enter the AP name, which is case insensitive. WSM supports fuzzy matching
for this field.
−
Serial Number—Enter the serial number. WSM supports fuzzy matching for this field.
−
Radio Type—Select a radio type. Options are: All, 802.11a, 802.11b, 802.11g, 802.11bg,
802.11at, 802.11an, 802.11gn, 802.11n(2.4 GHz), 802.11bgn, 802.11n, and 802.11n(5
GHz).
−
Admin Status—Select an administrative state for the radio. Options are Up and Down.
−
Location—Enter a location view name, or press Space and then select a location view
from the list. The Radio List displays all radios on the AP.
c.
Click Query. The Radio List displays all radios matching the query criteria.
d.
Select one or multiple radios.
e.
Click OK to go back to the Radio Batch Configuration page. The Radio List displays the
selected radios.
10.
Click the Delete icon to delete the target AC.
11.
Click OK.
The Result List page appears, displaying the operation result for configuring each radio
Result List
{
AP Label—Label of the AP.
{
Radio ID—ID of the radio.
{
Result—Operation result for configuring radios. If the operation fails, WSM provides the
cause of failure. You can modify the configuration to configure radios again.
12.
Click Back to go back to the Radio Batch Configuration page.