Modifying a wlan, Binding a wlan to groups – H3C Technologies H3C Intelligent Management Center User Manual
Page 171
149
The WLAN List displays all WLANs created on the AC.
4.
Click Add.
5.
Configure the basic information:
{
Profile Name—Enter a profile name, which is a string of 1 to 32 characters.
{
SSID—Enter a profile name, which is a string of 1 to 32 characters.
{
Admin Status—Enable or disable the WLAN. If you select Enable, a WLAN is enabled
immediately after it is created. The APs in the default group use this WLAN to provide
wireless services because the WLAN is automatically added to the default group.
{
Broadcast SSID—Whether to enable APs to broadcast their SSIDs, Enable or Disable. Enable
indicates the APs bound with the WLAN will broadcast their SSIDs so that they can be
discovered by clients. Disable indicates the APs do not support SSID broadcasting.
6.
Configure security information. For more information, see
.
7.
Click OK.
Modifying a WLAN
Modifying a WLAN that is in Enable state makes the WLAN unavailable for a short time, and all
clients connected to the WLAN are disconnected.
To modify a WLAN:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the Operation icon
for the target AC and select WLAN Configuration from the menu.
The WLAN List displays all WLANs created on the AC.
4.
Click the Operation icon
for the target WLAN and select Modify from the menu.
The Profile Name and SSID cannot be modified. For information about how to configure other
parameters, see "
."
5.
Click OK.
Binding a WLAN to groups
A WLAN is added to the default group after being created. You cannot remove it from the default
group, but you can add it to another group by binding the WLAN to the group.
After a WLAN whose admin status is Enable is added to a group, the APs use the WLAN to provide
wireless services.
To bind a WLAN to groups:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the Operation icon
for the target AC and select WLAN Configuration from the menu.
The WLAN List displays all WLANs created on the AC.
4.
Click the Operation icon
for the WLAN of the target group and select Group Bindings from
the menu.
The Group List displays all groups created on the AC.