H3C Technologies H3C Intelligent Management Center - Manual (Page 153)

131
are sent frequently, consuming more of the available bandwidth. However, the system can
recover quickly from interference or collisions.
{
Fragment Threshold (bytes)—Enter the maximum length of frames that can be transmitted
without fragmentation. It is an even number ranging from 256 to 2346, and the default value
is 2346. A frame longer than Fragment Threshold is transmitted in fragments.
{
Short Frame Retransmission Threshold—Enter the maximum retransmission times for frames
that are not longer than RTS Threshold. The value is ranges from 1 to 15, and the default
value is 7.
{
Long Frame Retransmission Threshold—Enter the maximum retransmission times for frames
that are longer than RTS Threshold. The value is ranges from 1 to 15, and the default value is
4.
{
Rx Lifecycle (ms)—Enter the interval for a fit AP to hold a received frame in its buffer memory.
The value is ranges from 500 to 250000, and the default value is 2000.
{
Max Clients—Enter the maximum number of clients allowed in the radio policy. The value is
ranges from 1 to 124, and the default value is 64.
7. Click OK.
Modifying a radio policy template
You cannot modify the name of an existing radio policy template.
To modify a radio policy template:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the Template Management link.
The Template Management page appears. By default, the Radio Policy Template List page
appears, displaying all radio policy templates.
5. Click the Modify icon for the target radio policy template.
The Modify Radio Policy Template page appears.
6. Modify the radio policy parameters as except the policy name.
For more information about the parameters, see "
Adding a radio policy template ."
7. Click OK.
Deleting a radio policy template
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the Template Management link.
The Template Management page appears. By default, the Radio Policy Template List is
displayed, showing all radio policy templates.
5. Click the Delete icon for the target radio policy template.
A confirmation dialog box appears.