H3C Technologies H3C Intelligent Management Center - Manual (Page 237)

215
3. Click the Comware-Based tab.
4. In the Fat AP Batch Configuration Management (H3C) area, click the Service Policies Batch
Configuration link.
The Service Policies Batch Configuration page appears.
5. Click the Bind Service Policies in Batches link.
6. Enter the SSID of the service policies you want to bind.
7. In the Port Description box, enter the BSS interface ID, in this format: WLAN-BSS interface ID.
The default value is WLAN-BSS 1.
You can enter an existing or nonexistent WLAN BSS interface ID on the fat AP. If you enter a
nonexistent interface ID, WSM automatically creates the interface ID for the BSS interface. You
can only bind one BSS interface to one service policy. If the interface ID you enter is bound to
other service policy already, the binding operation will fails.
8. In the Fat AP List area, click Add.
The Select Device dialog box appears.
9. Enter or specify one or more of the following query criteria to search for the fat APs you want to
configure:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fat AP. WSM supports fuzzy
matching for this field.
{
Model—Enter the model of the fat AP. WSM supports fuzzy matching for this field.
{
Connectivity Status—Specify a connectivity state for the fat AP. Options are:
− Unlimited
− Reachable
− Unreachable
{
Location—Enter or specify the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
10. Click Query.
The Fat AP List displays all fat APs matching the query criteria. Click Reset to clear the query
criteria and display all fat APs.
11. Specify the target fat APs.
12. Click OK to close the Select Device window.
The Fat AP List displays all selected fat APs.
13. Click OK.
The Result List page appears, displaying the operation result for modifying service policies in
batches.
14. Click Back to go back to the page for modifying service policies in batches.